News

When using the interactive flat panel, I believe that many users are likely to encounter static interference problems, and most users are at a loss to know how to solve the static interference problem.

In fact, in order to prevent and solve the touch machine by static interference, there are methods, we will give you a detailed introduction, the specific methods are as follows:

1. Separate lines from lines

Separate the interactive flat panel connection lines, lines and lines directly do not put together.

When wiring, separate the VGA cable from the power cable. Generally, VGA cable has no shielding layer, and it may easily cause static electricity if it is combined with the power cable.

In particular, separate the VGA cable from the power cord. Because the normal VGA cable does not have a shielding layer. VGA cables without a cover and power cables together are prone to static electricity. Place them at a certain distance to effectively prevent static electricity.

Input signal according to user needs to choose different video processing system, VGA, composite video, super video, color difference terminal /YCBCR or DVI input, to meet different occasions, different input requirements.

Through the control software, a variety of signal switching, splicing LCD screen display of any combination of display, image stretching display, image display, image overlay display of travel.

2.Grounding

The so-called grounding is the discharge of static electricity directly to the earth through wires, this method is simple to operate, low cost, and the effect is ideal, is the most direct and effective prevention of static electricity measures.

Low pixel images can be clearly reproduced in full HD display.

3. Insulation

The so-called insulation is to use the footsteps of insulation to touch the all-in-one machine with metal and power connection paste, so that the isolation between the two, the insulation between the two, there will be no static electricity.